DW-200S Micro spot-welder

DW-200S spot-welder (inverter type)
▲ CCD vision module: automatic recognition & position
▲ servo motor + ball screw system: excellent working precision
▲ 200×200×20mm working range: applicable to various work pieces
▲ inverter power supply: high welding accuracy & speed

 

DW-200S inverter advantages:
▲ inverter DC welder; with steady DC power output regulated by inverter
pulse & inverter cycle
▲ steady & high welding speed, no variation during the welding
▲ 1-4kHz high working frequency, and low loss

▲ technical advantages:
◎ real-time monitoring on current, voltage, power & resistence
◎ 100-1000A high output current
◎ 2 types of control, rated current and rated voltage
◎ real-time dynamic displaying of various working parameters
◎ power-on detection system
◎ 15 goups of standard welding parameters
◎ DC pulse output, intensive heat, steady welding performance
◎ MCU control type
◎ fault diagnosis, automatic alarm & self-protection system

Model	DW-200S
1. Current output type	Front panel output
2. Power output	Single-phase AC220V +/-10%, 50/60Hz
3. Rated KVA	1.9 KVA (5% usage rate)
4. Power inverter efficiency	4 KHZ
5. Max short-circuit current	1,000A
6. Control type	Primary in current, secondary in voltage
7. Heater setting	current : 100~1000A; Voltage : 0.10-3.00V
8. Dot Count	0~99999
9. Current overshoot regulation function	With (level 1~9)
10. Warning function	Over-current, over voltage, over heat, no current
11. Status output function	Preparation done, NG, Good, full count, full step-up, over
12. Cooling type	forced-air cooling
13. Language in display	English
14. Max usage rate	5% (output 1,000A/h)